Wellness & Self-Care
2″ x 50′ Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties
$17.99
Product description
WHY CHOOSE LEDAUT EXHAUST WRAP FOR YOUR CAR AND MOTOTCYCLE ?
Reduces underhood temperatures a Realistic 50%! Withstands 1800°F Direct/2500°F Intermittent Heat.
High resistance to abrasions, oil spills, temperatures and vibration breakdown.
Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves
to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place and simply use stainless
ties to secure the ends in place.
The product contains a small amount of wax, which will volatilize and produce a small amount of harmless smoke in high temperature.
304 STAINLESS STEEL LOCKING TIES GREAT FOR CAR MOTORCYCLE INSTALLATION.
With 8 pcs 11.8″ long 30cm metal locking ties.
With 8 pcs 7.9″ long 20cm metal locking ties.
Great ties for the motorcycle and car exhaust instaling !
TIPS
1. The product contains a small amount of wax, which will volatilize and produce a small amount of harmless smoke in high temperature. 2. The product will not burn, but will be stiff and fragile while in continuously in a high temperature. 3.Exhaust wrap insulates heat in exhaust systems but cannot isolate all. Insulation effects depend on thickness. Avoid contact with body and combustible materials to prevent burns and ignition while using.
2″X50′ Titanium Wrap with (pack of 16) Stainless Steel(304) Locking Ties.
Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place and simply use stainless ties to secure the ends in place.
High resistance to abrasions, oil spills, temperatures and vibration breakdown.
The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat.
The thermal heat wrap reduces heat under hood up to 50% and improving car And motorcycle Performance
12 reviews for 2″ x 50′ Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties
Fast, Reliable, and Convenient
Enjoy seamless delivery with Amazon Store. Whether you're shopping for everyday essentials, electronics, fashion, or gifts, your order is delivered straight to your door—fast and hassle-free. With options like Standard Delivery, Express Shipping, and even Same-Day Delivery in select areas, Amazon makes it easier than ever to get what you need when you need it.
SL –
Quality product!
It delivers excellent thermal protection, keeps heat off nearby bike parts and significantly reduces radiant heat. Installation was straightforward thanks to the included ties. The titanium finish looks professional and is highly durable. After miles of riding, it still looks great and works like new. recommend to any rider looking to upgrade their exhaust heat protection.
Bev Karpovck –
Its a Wrap!
This is just great stuff like all the other guys are reviewing. The titanium looks better and holds the heat in better than the plain fiberglass wrap. This is my second roll I bought and one roll will wrap a pair of headers for my 69 Firebird. Such a good deal and covers the SS header so you wont burn yourself if working in the hot area of your motor. Great instructions also. Thanks Guys! I will be buying more.
Brian hall –
it’s just fiberglass installation wrap
The product is pretty cool. I like the color but when I opened it, the cross stitching it feels and looks like fiberglass webbing. I got the 50 foot roll 2 inches and I put half of it on my cold air intake and it works pretty well. It was easy to put on the metal zip ties worked pretty good I’ll like them, but I don’t think it has any titanium in it. It feels like fiberglass webbing pretty much but even if it is just fiberglass weapon. I’m sure it will still do the job
Zeriel –
Works great on my car’s exhaust.
I applied this on my car’s exhaust (Toyota MR2 ZZW30) it was enough to cover the headers, the down pipe, and part of the Main cat. It was not difficult to apply but you NEED gloves and eye protection because the fiberglass strands are very tiny and could pierce your skin. I soaked the whole thing in water and it became a lot more manageable. The provided metal straps are not that good, you need pliers to tighten them and I used a Dremel to cut the remains. If you got the money, get better metal straps, if not, these work fine but you need to cut off the excess and they’re a bit of a pain.Pros: After applying the wrap along with the factory heat shields there was a noticeable decrease in heat in the engine bay. You still cant touch the heat shields directly but inside the compartment there’s less radiating heat. I also noticed how the speed of the gases increased and can be heard in the exhaust. Sometimes there’s even a bit of backfire noise on deceleration.Cons: Tons of smoke on day one, had to run the engine for a couple of hours and rev it really high to let the wrapping get heated and release all the moisture. They also smell pretty bad on day one. After 2-3 days the smoke is completely gone but they still smell a bit. Everything is back to normal in around a week.Some people also say they can rust the exhaust if they get wet often because they hold moisture. I don’t believe this because the pipes get so hot that I doubt they can stay wet for long. Still I applied high temp Rustoleum paint on the pipes before the bandages. I would recommend rust prevention or more expensive ceramic coating if you got a good exhaust system just in case. I didn’t apply Silicon because the one I got is flammable, but you could try this as well to make them water proof. I still got my heat shields/covers and I avoid driving on the rain so I’m not worried.Good product, would buy again, Thanks!
Garage rat –
Heat shield wrapping
Nice stuff and good value, just was not right for our application
Jami Sizemore –
Fantastic product!
This was a fantastic product. I used it on my bike pipes which made an amazing difference. before wrapping them, the pipes melted 2 pair of chaps and cooked my leg numerous times. I highly recommend this product.
B. S. –
OK, but spend some more and get a better product.
Overall, an OK product. The one down-side is there is no additional stitching to help keep the material together on the edges. Like all of these wraps it frays pretty easily when unrolling. Also it should not say “Titanium” in the product description as there is a significant quality difference between fiberglass wraps and titanium wraps. Other than that, the wrap offers decent heat resistance. I saw a drop in about 30º before/after in hot areas around the exhaust pipes when riding. One roll of 50′ was enough to cover both pipes with about 12-15 feet left over for my bike. I only got the wrap wet (not soaking) when installing, wrapped pretty tight over the pipes. And of course, wear gloves and cover your arms as best you can. Be sure to wipe down surrounding areas with a damp cloth to get rid of any stray fiberglass.Update – After a few weeks of riding with this wrap and and repairing a section due to tearing I thought it best to include some additional thoughts. I have adjusted my rating down to 3 stars instead of 4 with some of these nuances:• After the wrap has dried and ‘cured’, I am seeing tons of fraying. Ridiculous amounts. The loops on the edges are the worst and it looks like every wrap around the pipe has ‘whiskers’ or is ‘fuzzy’. This indicates poor-quality fiberglass.• The wrap is woven very loose. As I was making my loops around the pipes, one side would become increasingly loose, to where I would have wrinkles under the next loop. Not really much you can do about it because of the material construction.• Many defects in the weave/stitching. I had to re-cut multiple sections due to the poor weaving of the material. This only resulted in about 2-3 feet of wasted material, but still. If I were doing one long section of pipe I would have been screwed.That’s all for now folks.
Pork Chop –
Good quality. The color looks really nice. The twill weave makes it easier to go around sharp bends. I believe it was less that 5 dollars more than the standard weave. Worth the extra few bucks. I haven’t used it long enough to say how well the color does. I’ve tried some that were dyed different colors. The results are always the same. Garbage.
Michel dB. –
Noticed a large hole in the elbow of the exhaust pipe of our motorhome (Cummins 8.9L diesel) and didn’t have time to have it fixed properly before we were leaving but didn’t want to drive without doing something so figured I’d try this and it worked amazingly (the last picture is after driving about 2500 km). I actually used this product (brownish) and another one (silver – titanium adhesive backed heat shield). It was easy to apply and lasted the trip and looks to still be good until I can fix properly in the Spring.
Gavin G –
Bought this to wrap my bike exhaust, the heat coming off the rear pipes were very uncomfortable. Followed some YouTube advice, wedded the fiberglass first and it made the install much better. It comes with straps but I opted to use better band clamps at the start and finish. The supplied metal straps were good to secure in general but we’re not very tight fitting when applied. My only advice is to make sure you wear nitrile gloves when applying. The small fibers are sharp and can embed in your skin. The wrap reduced the heat quite well, I would say 30 to 40% reduction on felt heat on my leg. The rap on the pipe under the engine is definitely reducing the heat transferred into the oil pan area. Just an added bonus.
Dakota wittig –
They come with little metal zip ties that are a pain to use if you don’t have the proper tool. The wrap frays from the center out and it’s a bit to thick to do anything smaller than a 2 inch pipe with.
Bill Thompson –
Excellent product , works an intended ! .